Design and commissioning of resistive foil bolometer diagnostics on the ST40 tokamak

Following successful campaigns on the compact high field spherical tokamak ST40, resistive gold foil bolometers have now been installed to measure the radiated power profile. Positioned on the midplane, two bolometer cameras offer perspectives of the horizontal and vertical planes, while the third camera, situated above the midplane, provides a vertical view of the top divertor plates, including the X-point and the strike points. Further, these cameras use a commercial off-the-shelf data acquisition platform with modules specifically designed for bolometers in a Wheatstone bridge configuration, providing both phase sensitive detection and in situ calibration. This paper presents an overview of the design and functionality of all three cameras and the commissioning of the horizontal plane camera. The commissioning of the horizontal camera shows data from a range of plasma pulses, presenting a positive correlation between the relative profiles measured from the bolometer camera and an absolute extreme ultraviolet diode camera viewing along similar lines of sight.. Authors: Harryman, Daniel M. [Tokamak Energy Ltd., Abingdon (United Kingdom)] (ORCID:0000000211949081); Colgan, C. [Tokamak Energy Ltd., Abingdon (United Kingdom)] (ORCID:0000000162272317); Lovell, Jack [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000195653466); Moscheni, Matteo [Tokamak Energy Ltd., Abingdon (United Kingdom)] (ORCID:0000000263557274); Naylor, Graham [Tokamak Energy Ltd., Abingdon (United Kingdom)] (ORCID:0009000902794506). DOE Contract: AC05-00OR22725. Subjects: 70 PLASMA PHYSICS AND FUSION TECHNOLOGY