Diagnosis of PV Cell Antireflective Coating Degradation Resulting From Hot-Humid High-Voltage Potential Aging
DOE
Questions this answers
Sources
- doe_osti · checked 2025-04-16
Source record
The underlying research record — supporting evidence for the object above.
Key Details
- Posted Date
- Source
- doe_osti
Description
Corrosion of the antireflective coating on a photovoltaic cell ("ARc corrosion") has previously been observed in studies using hot-humid test conditions with external high-voltage (HV) bias. This study primarily focuses on known vulnerable legacy aluminum back surface field cells in mini-modules (MiMos) put through comparative stepped stress tests. Each cell type had MiMos at +1500 V, -1500 V, or unbiased ("Voc") potential, which were sequentially subjected to test conditions of 60 degrees C/60% relative humidity (RH) for 96 h, as in International Electrotechnical Commission Technical Specification 62804-1; 70 degrees C/70% RH for 200 h; and 85 degrees C/85% RH for 200 h. Characterizations at each step included visual camera and electroluminescence (EL) imaging, colorimetry, and current-voltage curve tracing. Final characterizations included: Suns-Voc, spatial mapping of external quantum efficiency, high-resolution photoluminescence, EL, and dark lock-in thermography imaging. Forensics were performed on extracted cores, including scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy, and scanning Auger microscopy (SAM). Forensics were also conducted on MiMos from previous studies that underwent stepped HV aging and separate outdoor aged full-sized modules. ARc corrosion was specifically seen for the glass/encapsulant/cell side of the +1500 V (HV+) stressed MiMos and modules. Appearance, color, and reflectance were the most distinguishing characteristics relative to glass corrosion, gridline corrosion and delamination, and other concurrent degradation modes. SEM/EDS and SAM identified the conversion of silicon nitride to hydrated silica, hydrous silica, or hydrated amorphous silica, which preferentially occurred at the edges and tips of the pyramidal textured cell surface.. Authors: Miller, David [National Renewable Energy Lab., Golden, CO (United States)] (ORCID:0000000246985277); Arnold, Rachael [National Renewable Energy Lab., Golden, CO (United States)] (ORCID:0000000236566079); Hacke, Peter [National Renewable Energy Lab., Golden, CO (United States)]; Hayden, Steven [National Renewable Energy Lab., Golden, CO (United States)]; Jackson, Aubrey [National Renewable Energy Lab., Golden, CO (United States)]. DOE Contract: AC36-08GO28308. Subjects: 14 SOLAR ENERGY; International Electrotechnical Commission (IEC) 62804; SOLAR ENERGY; antireflective coating; damp heat; ethylene-co-vinyl acetate (EVA); microscopy; optical absorptance; optical reflectance; passivation layer
Point of Contact
vinyl acetate
0000000246